Rapid Deoxyfluorination of Alcohols with N-Tosyl-4-chlorobenzenesulfonimidoyl Fluoride (SulfoxFluor) at Room Temperature

The deoxyfluorination of alcohols is a fundamentally important approach to access alkyl fluorides, and thus the development of shelf-stable, easy-to-handle, fluorine-economical, and highly selective deoxyfluorination reagents is highly desired. This work describes the development of a crystalline compound, N-tosyl-4-chlorobenzenesulfonimidoyl fluoride (SulfoxFluor), as a novel deoxyfluorination reagent that possesses all of the aforementioned merits, which is rare in the arena of deoxyfluorination. Endowed by the multi-dimensional modulating ability of the sulfonimidoyl group, SulfoxFluor is superior to 2-pyridinesulfonyl fluoride (PyFluor) in fluorination rate, and is also superior to perfluorobutanesulfonyl fluoride (PBSF) in fluorine-economy. Its reaction with alcohols not only tolerates a wide range of functionalities including the more sterically hindered alcoholic hydroxyl groups, but also exhibits high fluorination/elimination selectivity. Because SulfoxFluor can be easily prepared from inexpensive materials and can be safely handled without special techniques, it promises to serve as a practical deoxyfluorination reagent for the synthesis of various alkyl fluorides.     

The Berry–Esseen bounds of the weighted estimator in a nonparametric regression model

Consider the following nonparametric model: \(Y_{ni}=g(x_{ni})+ \varepsilon _{ni},1\le i\le n,\) where \(x_{ni}\in {\mathbb {A}}\) are the nonrandom design points and \({\mathbb {A}}\) is a compact set of \({\mathbb {R}}^{m}\) for some \(m\ge 1\), \(g(\cdot )\) is a real valued function defined on \({\mathbb {A}}\), and \(\varepsilon _{n1},\ldots ,\varepsilon _{nn}\) are \(\rho ^{-}\)-mixing random errors with zero mean and finite variance. We obtain the Berry–Esseen bounds of the weighted estimator of \(g(\cdot )\). The rate can achieve nearly \(O(n^{-1/4})\) when the moment condition is appropriate. Moreover, we carry out some simulations to verify the validity of our results.

     

Binding and cytotoxicity of 131I-labeled gastrin-releasing peptide receptor antagonists modified by cell penetrating peptides

Gastrin releasing peptide receptors (GRPRs) are one of the most interesting targets over expressed in various tumors. Due to the superior potential of the GRPR antagonist analogs, they have been studied in the tumor radio imaging and therapy field. However, typical antagonists suffered the shortcomings of no internalization and poor binding affinity which hampered their applications in radiotherapy. Therefore, we attempted to introduce Oligoarginines (cell penetrating peptides) to RM26, aiming to increase the binding affinity or even trigger the internalization of the peptides on cells. The results showed Arg₆ as the most potent CPP, significantly enhanced the binding avidity of RM26 to the GRPR.

     

One-step synthesis of magnetic composite UiO-66/Fe3O4/GO for the removal of radioactive cesium ions

Journal of Radioanalytical and Nuclear Chemistry - In this study, the UiO-66/Fe3O4/GO composite was prepared by one step method for removal of cesium ions (Cs+) in water and exhibited excellent...     

Force Chain Characteristics and Effects of a Dense Granular Flow System in a Third Body Interface During the Shear Dilatancy Process

In order to investigate the characteristics of force chains in a granular flow system, a parallel plate shear cell is constructed to simulate the shear movement of an infinite parallel plate and observe variations in relevant parameters. The shear dilatancy process is divided into three stages, namely, plastic strain, macroscopic failure, and granular recombination. The stickslip phenomenon is highly connected with the evolution of force chains during the shear dilatancy process. The load–distribution rate curves and patterns of the force chains are utilized to describe the load-carrying behaviors and morphologic changes of force chains separately. Force chains, namely, “diagonal gridding,” “tadpole-shaped,” and “pinnate” are defined according to the form of the force chains in the corresponding three stages.     

高雷诺数下非混相Rayleigh-Taylor不稳定性的格子Boltzmann方法模拟

本文采用相场格子Boltzmann方法研究了竖直微通道内中等Atwoods数流体的单模Rayleigh-Taylor不稳定性问题,系统分析了雷诺数对相界面动力学行为以及扰动在各发展阶段演化规律的影响.数值结果表明高雷诺数条件下,不稳定性界面扰动的增长经历了四个不同的发展阶段,包括线性增长阶段、饱和速度阶段、重加速阶段及混沌混合阶段.在线性增长阶段,我们计算获得的气泡与尖钉振幅符合线性稳定性理论,并且线性增长率随着雷诺数的增加而增大.在第二个阶段,我们观察到气泡与尖钉将以恒定的速度增长,获得的尖钉饱和速度略高于Goncharov经典势能模型的解析解[Phys.Rev.Lett.200288134502],这归因于系统中产生了多个尺度的旋涡,而涡之间的相互作用促进了尖钉的增长.随着横向速度和纵向速度的差异扩大,气泡和尖钉界面演化诱导产生的Kelvin–Helmholtz不稳定性逐渐增强,从而流体混合区域出现许多不同层次的涡结构,加速了气泡与尖钉振幅的演化速度,并在演化后期阶段,导致界面发生多层次卷起、剧烈变形、混沌破裂等行为,最终形成了非常复杂的拓扑结构.此外,我们还统计了演化后期气泡与尖钉的无量纲加速度,发现气泡和尖钉的振幅在后期呈现二次增长规律,其增长率系数分别为0.045与0.233.而在低雷诺条件下,重流体在不稳定性后期以尖钉的形式向下运动而轻流体以气泡的形式向上升起.在整个演化过程中,界面变得足够光滑,气泡与尖钉在后期的演化速度接近于常数,未观察到后期的重加速与混沌混合阶段.     

Experimental and Numerical Investigation on Effects of the Steam Ingestion on the Aerodynamic Stability of an Axial Compressor

In order to investigate the influence of steam ingestion on the aerodynamic stability of a two-stage low-speed axial-flow compressor, multiphase flow numerical simulation and experiment were carried out. The total pressure ratio and stall margin of the compressor was decreased under steam ingestion. When the compressor worked at 40% and 53% of the nominal speed, the stall margin decreased, respectively, by 1.5% and 6.3%. The ingested steam reduced the inlet Mach number and increased the thickness of the boundary layer on the suction surface of the blade. The low-speed region around the trailing edge of the blade was increased, and the flow separation region of the boundary layer on the suction surface of the blade was expanded; thus, the compressor was more likely to enter the stall state. The higher the rotational speed, the more significant the negative influence of steam ingestion on the compressor stall margin. The entropy and temperature of air were increased by steam. The heat transfer between steam and air was continuous in compressor passages. The entropy of the air in the later stage was higher than that in the first stage; consequently, the flow loss in the second stage was more serious. Under the combined action of steam ingestion and counter-rotating bulk swirl distortion, the compressor stability margin loss was more obvious. When the rotor speed was 40% and 53% of the nominal speed, the stall margin decreased by 6.3% and 12.64%, respectively.     

Sulfono‐γ‐AApeptides as a New Class of Nonnatural Helical Foldamer

Foldamers offer an attractive opportunity for the design of novel molecules that mimic the structures and functions of proteins and enzymes including biocatalysis and biomolecular recognition. Herein we report a new class of nonnatural helical sulfono‐γ‐AApeptide foldamers of varying lengths. The crystal structure of the sulfono‐γ‐AApeptide monomer S6 illustrates the intrinsic folding propensity of sulfono‐γ‐AApeptides, which likely originates from the bulkiness of tertiary sulfonamide moiety. The two‐dimensional solution NMR spectroscopy data for the longest sequence S1 demonstrates a 10/16 right‐handed helical structure. Optical analysis using circular dichroism further supports well‐ defined helical conformation of sulfono‐γ‐AApeptides in solution containing as few as five building blocks. Future development of sulfono‐γ‐AApeptides may lead to new foldamers with discrete functions, enabling expanded application in chemical biology and biomedical sciences.